Looking for having your own customized pre-roll tins? It is an easy job.
Introduction
Ordering custom pre‑roll tins starts with a few simple details. Tell us the size of your pre‑rolls, how many go in each pack, and how many tins you need. You can send your artwork later.
At Tinwonder, we start with the tin size and shape. Then we move to the quote, design, samples, and production. You get to check a physical sample before we make the full order.
Here is what to expect at each step, and what we need from you.
1. Tell us what you need to pack
Start with your product. Send us the full length and widest diameter of each pre‑roll. Let us know the number of pieces per tin, too.
For example, a five‑pack needs space for all five pieces. It also needs enough room for your customer to lift one out easily.
A photo or a simple drawing helps us understand your idea. If you have several product sizes, share them with us. We can then discuss whether one tin size could work across your range.
2. Choose a tin size and mold
We first check our existing molds. A mold is the tool used to shape the metal. If one suits your product, you may avoid the cost of making a new one.
We check the space inside the tin, not just its outer size. The lid and any inner tray can reduce the room available for your pre‑rolls.
Need a special shape or size? We can discuss a new mold. Drawings and a prototype can help you review the shape before we move ahead. The final metal sample still needs its own checks.
3. Pick the lid and inner tray
How do you want the tin to open? A hinged lid lifts up. A sliding lid moves across the top. Think about how your customer will hold the tin and take out a pre‑roll.
An inner tray, also called an insert, helps keep the pieces in place. It should hold them without making them hard to remove.
Tell us early if you need child‑resistant packaging or a seal that shows when the pack has been opened. These serve different purposes. For child‑resistant designs, check that the test report covers the exact tin you plan to order.
If you need an airtight pack, let us know. A metal body alone does not prove that a tin is airtight.
4. Get a clear quote
To prepare a quote, we need your tin size, quantity, and printing needs. Please include the inner tray, preferred finish, and delivery location.
If you have more than one design, give us the quantity for each. Five thousand tins with one design is a different order from five designs of one thousand each.
Ask us to confirm the minimum order for your chosen tin. We can also explain any separate mold or sample costs.
When comparing quotes, check what each price includes. The tray, shipping, or packing may be listed separately.
5. Add your artwork
Once we agree on the tin, we send you its artwork template. Your designer can place the logo, text, and colors on it.
Keep the design easy to read. Leave room for any labels or batch details you add after filling. Important text should stay clear of seams and curved edges.
You can also choose a finish, such as gloss or matte. If you have a color sample you want us to match, share it with us.
Colors on a screen can look different in print. Use the printed sample to check how your design looks on the actual tin.
6. Check and approve your sample
With your provided artworks, we are to make and send you the printed samples. Then this is the step to take your time with. Put your product in the sample and try it yourself.
Does everything fit? Can you remove one pre‑roll easily? Does the lid close smoothly? Check the print and colors as well.
If your team adds labels, try those on the sample too. You may spot a space problem that was easy to miss on the drawing.
Send us one clear list of changes. Once you are happy, confirm the final sample and artwork. We use the approved version as the reference for production. Keep a sample with your packing team so they have the same reference.
7. Start production
After sample approval, we can begin the full order. The main steps are preparing the tinplate, printing it, cutting the parts, forming the tins, and packing them.
Confirm your designs and quantities before this stage. Changes are harder once printing or forming has started.
We confirm the schedule for your order. Remember to allow time for samples, your review, and shipping as well as production. Tell us when you need the tins at your packing site, so we can discuss a realistic plan.
8. Inspect and ship the tins
Before shipping, the order needs to be checked against the approved sample. The checks should cover the print, size, lid, inner tray, and packing.
You can ask for our quality report or arrange an independent inspection. Agree on what will be checked before the inspection takes place.
Tins also need good protection during transport. We discuss carton packing and whether pallets are needed for your shipment.
Confirm the delivery address and who will handle the shipping. Leave time for your team to receive and unpack the tins before filling starts.
Ready to start
Send us your pre‑roll size, pack count, order quantity, and delivery location. Add a reference photo if you have a style in mind.
You do not need to have every detail decided. We can help you review the tin options and work out the next step.
For a broader look at our process, read our blog, Eight Procedures to Order Custom Tin Box. Or contact us to discuss your custom pre‑roll tins.
Frequently asked questions
Do I need a new mold?
Not always. We first look for an existing mold that fits your product.
Can I get a quote without finished artwork?
Yes. We can discuss a quote from your size, quantity, and design needs. Later changes may affect the price.
Can I see a sample before production?
Yes. You review and approve the sample before we make the full order.
How long does an order take?
We confirm this for your project. The timing depends on the mold, samples, production, and shipping. Normally 20 days for new mold if needed, 7-10 days for printed sampling, 30 days for mass production, 40 days for DDP sea shipping to USA.
What material are custom pre‑roll tins made from?
Custom pre‑roll tins are built with food‑grade tinplate. Interior lacquers can comply with FDA, Prop 65, EU 1935/2004, and so on. We can provide the corresponding testing reports.
Can custom pre‑roll tins be child‑resistant?
Yes, child‑resistant pre‑roll tins are available. CR test reports are available.
What finishes can I get for custom pre‑roll tins?
Gloss, matte, soft‑touch, spot UV and embossing are available. We can match your physical colour sample.
Are custom pre‑roll tins airtight?
Standard tins are not airtight. Gaskets, clamshells or special sealing structures can be added; advise us at quoting.
What is the MOQ for custom‑printed pre‑roll tins?
3000-5000pcs per mold to start.
Can you make custom inner inserts for pre‑roll tins?
Yes, custom inner trays can be made. Provide pre‑roll dimensions and quantity per tin for design.
Do you offer export compliance documents for pre‑roll tins?
Yes. We provide full‑chain compliance declarations for USA, EU, and other target markets.
Can I order blank pre‑roll tin samples first?
Blank samples from existing molds are available for fit‑testing. Custom‑printed samples carry sample‑run fees.